Please remove the legging of the application room before deciding what type of flooring you should buy. You should add 10% of cut share for the dimensions you measured.
If necessary, remove the former flooring. If the current flooring surface is smooth and firm, you can skip this step.
You should fill the cracks and holes of the sub-flooring with a filling material. For this step, fill the gaps with a filling material and then level using a spatula.
Plates should be applied as parallel to the wall within general view (generally, the wall opposite the entry). You should take measurements in order to determine the central point of application room. Adjust the plates so as to divide them equally to both sides.
Please apply adhesive material with a recommended notched trowel. Please use recommended adhesive materials and comply with the instructions of products. Please wait as long as specified by the manufacturer of adhesive material before applying flooring plates.
You are required to apply the first plate as evenly as possible starting with the central line. Because the following plates will be applied according to the alignment of the first plate.
Please apply adhesive material with a recommended notched trowel. Please use recommended adhesive materials and comply with the instructions of products. Please wait as long as specified by the manufacturer of adhesive material before applying flooring plates.
You are required to apply the first plate as evenly as possible starting with the central line. Because the following plates will be applied according to the alignment of the first plate.
Please apply adhesive material with a recommended notched trowel. Please use recommended adhesive materials and comply with the instructions of products. Please wait as long as specified by the manufacturer of adhesive material before applying flooring plates.
Assembly Methods
Click; Easy to assemble - can be disassembled, the installation process is clean, quiet and short-lived. Provides a unique silence while living and practicing.
Dry back; It provides a clean and dust-free installation. You can create decorative patterns and warm floor combinations using a combination of different models.